Structomat

Structomat is an AI engineering agent for structural steel. This connector gives Claude engineering tools that return computed results, not just text.

• analyze_frame: runs a 3D finite-element analysis of a steel frame, either from a template (pitched portal frame building, open mono-pitch canopy, multi-storey frame) or from a full JSON model. Linear or second order (P-Delta), with modal analysis. Returns the equilibrium check, deflections, sway, every support reaction, member axial forces, shears and moments (with the governing combination for EN 1990 or ASCE 7 sets) and natural periods with mass participation, plus a link that shows the same model and results in 3D.
• estimate_portal_frame_steel: steel tonnage of a single-span portal frame building (15–30 m span) by part, with a range and typical member sizes, interpolated between complete finite-element designs.
• find_examples and get_connection: search published steel projects, case studies, benchmarks and a library of checked steel connections with plates, bolts, welds, design code and the utilisation of each component.
• about_structomat and list_services: what Structomat does, design codes, what to send and what comes back.
• draft_project_request: prepares an e-mail draft for the user to review and send; it sends nothing.

No sign-in. Every tool is read-only: nothing is changed, sent or stored. Results are elastic analysis and estimates for checking, comparing and budgeting; they are not a code check or a signed design.